HOTSPOT -
You have a Microsoft Exchange Online tenant named contoso.com.
Email messages from a remote domain named fabrikam.com are received from a server that uses a wildcard certificate for fabrikam.com and are encrypted by using TLS.
Fabrikam.com is switching to a third-party cloud filtering service for inbound and outbound email. The IP address used by the third-party service is
131.107.200.10.
You need to reconfigure the connector to only accept messages from fabrikam.com that are encrypted and received from the third-party service.
Which two settings should you modify for the connector? To answer, select the appropriate settings in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
Answer:
Reference:
https://docs.microsoft.com/en-us/exchange/mail-flow-best-practices/use-connectors-to-configure-mail-flow/set-up-connectors-for-secure-mail-flow-with-a-partner
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Microsoft Exchange Online tenant that contains the following email domains:
✑ Adatum.com
✑ Contoso.com
✑ Fabrikam.com
When external recipients receive email messages from the users in the tenant, all the messages are delivered by using the @contoso.com email domain.
You need to ensure that the users send email by using the @fabrikam.com email domain.
Solution: You modify the properties of the fabrikam.com accepted domain.
Does this meet the goal?
Answer:
A
Reference:
https://docs.microsoft.com/en-us/exchange/mail-flow/accepted-domains/accepted-domains?view=exchserver-2019
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Microsoft Exchange Online tenant that contains the following email domains:
✑ Adatum.com
✑ Contoso.com
✑ Fabrikam.com
When external recipients receive email messages from the users in the tenant, all the messages are delivered by using the @contoso.com email domain.
You need to ensure that the users send email by using the @fabrikam.com email domain.
Solution: From the Microsoft 365 portal, you set fabrikam.com as the default domain.
Does this meet the goal?
Answer:
A
Changing the default domain would only affect new users. To affect existing users, you need to run the Set-Mailbox cmdlet.
Reference:
https://docs.microsoft.com/en-us/microsoft-365/admin/setup/domains-faq?view=o365-worldwide#how-do-i-set-or-change-the-default-domain-in-microsoft-365
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Microsoft Exchange Online tenant that contains the following email domains:
✑ Adatum.com
✑ Contoso.com
✑ Fabrikam.com
When external recipients receive email messages from the users in the tenant, all the messages are delivered by using the @contoso.com email domain.
You need to ensure that the users send email by using the @fabrikam.com email domain.
Solution: You create an email address policy.
Does this meet the goal?
Answer:
A
This would work in Exchange on-premise but you cannot create email address policies for user mailboxes in Exchange Online.
HOTSPOT -
You have a Microsoft Exchange Online tenant.
You have an on-premises scanner that emails scanned documents by using SMTP.
You need to create a Microsoft Office 365 SMTP relay to route email from the scanner to the internet. The solution must ensure that the connector accepts only email sent by the scanner.
How should you configure the connector? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
Answer:
Reference:
https://docs.microsoft.com/en-us/exchange/mail-flow-best-practices/how-to-set-up-a-multifunction-device-or-application-to-send-email-using-microsoft-365-or- office-365#option-3-configure-a-connector-to-send-mail-using-microsoft-365-or-office-365-smtp-relay
HOTSPOT -
You have a Microsoft Exchange Online tenant.
You need to create a report to display messages that have a delivery status of Quarantined.
From the modern Exchange admin center, you create a new message trace.
How should you configure the message trace? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
Answer:
Reference:
https://docs.microsoft.com/en-us/exchange/monitoring/trace-an-email-message/run-a-message-trace-and-view-results https://docs.microsoft.com/en-us/exchange/monitoring/trace-an-email-message/message-trace-modern-eac
You have a Microsoft Exchange Online tenant named contoso.com.
You create a partnership with two other companies named fabrikam.com and wingtiptoys.com. All the mailboxes of fabrikam.com are hosted in Microsoft 365. All the mailboxes of wingtiptoys.com are hosted in an on-premises Exchange Server 2019 organization.
You need to ensure that all the email messages sent from contoso.com to fabrikam.com and wingtiptoys.com is encrypted by using TLS.
What should you do?
Answer:
E
Reference:
https://docs.microsoft.com/en-us/exchange/mail-flow-best-practices/use-connectors-to-configure-mail-flow/set-up-connectors-for-secure-mail-flow-with-a-partner
HOTSPOT -
You have a Microsoft Exchange Online tenant as shown in the following exhibit.
All email recipients have an email address that uses an SMTP suffix of @contoso.com.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Hot Area:
Answer:
Box 1:
Under ג€When to use this connectorג€, it says ג€Use only for email sent to these domains: *ג€
The asterisk means all domains so any external email will use the connector.
Box 2:
With Exchange Online, you don't need to configure a receive connector as you would with on-premises Exchange. Therefore, the server by default will be able to receive emails from any email host.
HOTSPOT -
You have a Microsoft 365 E5 tenant that contains the users shown in the following table.
You have a connector for a remote domain named contoso.com as shown in the following exhibit.
You have a transport rule as shown in the following exhibit.
User1 sends an email message to [email protected] that has a subject line containing the word Confidential.
User2 sends an email message to [email protected] that has a subject line of New report. The body of the message contains the word confidential.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:
Answer:
Reference:
https://docs.microsoft.com/en-us/compliance/assurance/assurance-encryption-in-transit
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Microsoft Exchange Online tenant that contains the following email domains:
✑ Adatum.com
✑ Contoso.com
✑ Fabrikam.com
When external recipients receive email messages from the users in the tenant, all the messages are delivered by using the @contoso.com email domain.
You need to ensure that the users send email by using the @fabrikam.com email domain.
Solution: From the Exchange Management Shell, you run Set-Mailbox cmdlet.
Does this meet the goal?
Answer:
B
Set-Mailbox -PrimarySmtpAddress <SmtpAddress>
Reference:
https://docs.microsoft.com/en-us/powershell/module/exchange/set-mailbox?view=exchange-ps
