Your network contains an Active Directory domain. All users have been issued with new computers that run Windows 10 Enterprise. All users have Microsoft 365
E3 licenses.
A user named Mia Hamm has an Active Directory user account named MHamm and a computer named Computer1. Mia Hamm reports that Computer1 is not activated.
You need to ensure that Mia Hamm can activate Computer1.
What should you do?
Answer:
D
Mia Hamm reports that Computer1 is not activated.
The solution is to perform a local AutoPilot Reset on the computer. This will restore the computer settings to a fully-configured or known IT-approved state. When the user signs in to Computer1 after the reset, the computer should activate.
You can use Autopilot Reset to remove personal files, apps, and settings from your devices. The devices remain enrolled in Intune and are returned to a fully- configured or known IT-approved state. You can Autopilot Reset a device locally or remotely from the Intune for Education portal.
Incorrect Answers:
A: All users have Microsoft 365 E3 licenses. This license includes Windows 10 Enterprise so we don't need to assign a Windows 10 Enterprise license to Mia
Hamm.
B: Redeploying Computer1 is not required.
C: A Volume License Key is not required.
Reference:
https://docs.microsoft.com/en-us/windows/deployment/windows-autopilot/windows-autopilot-requirements-licensing https://docs.microsoft.com/en-us/intune-education/autopilot-reset
Your network contains an Active Directory domain that is synced to a Microsoft Azure Active Directory (Azure AD) tenant.
The company plans to purchase computers preinstalled with Windows 10 Pro for all users.
The company the following requirements:
✑ The new computers must be upgraded to Windows 10 Enterprise automatically.
✑ The new computers must be joined to Azure AD automatically when the user starts the new computers for the first time.
✑ The users must not be required to accept the End User License Agreement (EULA).
You need to deploy the new computers.
What should you do?
Answer:
D
Windows Autopilot is a collection of technologies used to set up and pre-configure new devices, getting them ready for productive use. You can also use Windows
Autopilot to reset, repurpose and recover devices.
The OEM Windows 10 installation on the new computers can be transformed into a "business-ready" state, applying settings and policies, installing apps, and even changing the edition of Windows 10 being used (e.g. from Windows 10 Pro to Windows 10 Enterprise) to support advanced features.
The only interaction required from the end user is to connect to a network and to verify their credentials. Everything beyond that is automated.
Reference:
https://docs.microsoft.com/en-us/windows/deployment/windows-autopilot/windows-autopilot
Your company is not connected to the internet. The company purchases several new computers with Windows 10 Pro for its users.
None of the new computers are activated.
You need to activate the computers without connecting the network to the Internet.
What should you do?
Answer:
B
You can configure one of the computers as a Key Management Service (KMS) host and activate the KMS host by phone. The other computers in the isolated network can then activate using the KMS host.
Installing a KMS host key on a computer running Windows 10 allows you to activate other computers running Windows 10 against this KMS host and earlier versions of the client operating system, such as Windows 8.1 or Windows 7. Clients locate the KMS server by using resource records in DNS, so some configuration of DNS may be required. This scenario can be beneficial if your organization uses volume activation for clients and MAK-based activation for a smaller number of servers. To enable KMS functionality, a KMS key is installed on a KMS host; then, the host is activated over the Internet or by phone using
Microsoft's activation services.
Reference:
https://docs.microsoft.com/en-us/windows/deployment/volume-activation/activate-using-key-management-service-vamt
Your network contains an Active Directory domain. All users have been issued with computers that run Windows 8.1.
A user named Mia Hamm has a computer named Computer1. You upgrade Computer1 to Windows 10 by performing a clean installation of Windows 10 without formatting the drives.
You need to migrate the settings for Mia Hamm from Windows 8.1 to Windows 10.
Which two actions should you perform?
NOTE: Each correct selection is worth one point.
Answer:
DE
D: As we have performed a clean installation of Windows 10 without formatting the drives, User1's Windows 8.1 user profile will be located in the \Windows.old folder. Therefore, we need to run scanstate.exe on the \Windows.old folder.
E: User1's Windows 10 profile will be in the C:\Users folder so we need to run loadstate.exe to apply the changes in the C:\Users folder.
Reference:
https://docs.microsoft.com/en-us/windows/deployment/usmt/usmt-how-it-works https://docs.microsoft.com/en-us/windows/deployment/usmt/usmt-common-migration-scenarios#bkmk-fourpcrefresh
You have a computer named Computer1 that runs Windows 10.
You deploy an application named Application1 to Computer1.
You need to assign credentials to Application1.
You need to meet the following requirements:
✑ Ensure that the credentials for Application1 cannot be used by any user to log on to Computer1.
✑ Ensure that the principle of least privilege is maintained.
What should you do?
Answer:
B
By using the Service1 account as the identity used by Application1, we are applying the principle of least privilege as required in this question.
However, the Service1 account could be used by a user to sign in to the desktop on the computer. To sign in to the desktop on the computer, an account needs the log on locally right which all user accounts have by default. Therefore, we can prevent this by assigning Service1 the deny log on locally user right.
Incorrect Answers:
A: Configuring Application1 to sign in as the Local System account would ensure that the identity used by Application1 cannot be used by a user to sign in to the desktop on Computer1. However, this does not use the principle of least privilege. The Local System account has full access to the system. Therefore, this solution does not meet the goal.
C: A service account needs the log on as a service user right. When you assign an account to be used by a service, that account is granted the log on as a service user right. Therefore, assigning Service1 the deny log on as a service user right would mean the service would not function.
D: The Local Service Account is a predefined local account used by the service control manager.
Reference:
https://docs.microsoft.com/en-us/windows/security/threat-protection/security-policy-settings/deny-log-on-locally
Your network contains an Active Directory domain that is synced to a Microsoft Azure Active Directory (Azure AD) tenant. All users have been issued with laptop computers as well as desktop computers that run Windows 10 Enterprise. All users have Microsoft 365 E3 licenses.
A user named Mia Hamm informs you that she must perform a BitLocker recovery on her laptop but she does not have her BitLocker recovery key.
You need to ensure that Mia Hamm can perform a BitLocker recovery on her laptop.
What should you do?
Answer:
C
The BitLocker recovery key is stored in Azure Active Directory.
Reference:
https://celedonpartners.com/blog/storing-recovering-bitlocker-keys-azure-active-directory/
Your company has an on-premises network that contains an Active Directory domain. The domain is synced to Microsoft Azure Active Directory (Azure AD). All computers in the domain run Windows 10 Enterprise.
You have a computer named Computer1 that has a folder named Folder1.
You must provide users in group named Group1 with the ability to view the list of files in Folder1. Your solution must ensure that the principle of least privilege is maintained.
What should you do?
Answer:
C
Reference:
https://www.online-tech-tips.com/computer-tips/set-file-folder-permissions-windows/
You have a computer named Computer1 that runs Windows 10.
Computer1 has a folder named C:\Folder1.
You need to meet the following requirements:
✑ Log users that access C:\Folder1.
✑ Log users that modify and delete files in C:\Folder1.
Which two actions should you perform?
Answer:
AD
Files and folders are objects and are audited through object access.
Reference:
https://www.netwrix.com/how_to_detect_who_changed_file_or_folder_owner.html
Your company has a computer named Computer1 that runs Windows 10. Computer1 is used to provide guests with access to the Internet. Computer1 is a member of a workgroup.
You want to configure Computer1 to use a user account sign in automatically when the the computer is started. The user must not be prompted for a user name and password.
What should you do?
Answer:
C
In the registry, add a default user name and a default password in the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon sbukey.
Reference:
https://support.microsoft.com/en-us/help/324737/how-to-turn-on-automatic-logon-in-windows
SIMULATION -
You have a computer named Computer1 that runs Windows 10.
Computer1 has a folder named C:\Folder1.
You need to meet the following requirements:
✑ Provide a user named Jon Ross with the ability to modify the permissions of C:\Folder1.
✑ Ensure that the principle of least privilege is maintained.
What should you do?
To complete this task, sign in to the required computer or computers.
Answer:
See explanation below.
1. In Windows Explorer, right-click the C:\Folder1 folder, and then click Properties.
2. Click on the Security tab, and then click Edit.
3. In the Permissions dialog box, add Jon Ross.
4. Specify the Allow Modify permissions for the Jon Ross.
5. Click OK twice to close the Security dialog box.
6. Click OK twice to close the Properties dialog box.
Reference:
https://docs.microsoft.com/en-us/iis/web-hosting/configuring-servers-in-the-windows-web-platform/configuring-share-and-ntfs-permissions
