350-801 | ExamData

Question#111

After an engineer runs the utils ntp status command on the Cisco Unified Communications Manager publisher, the stratum value is 16. Which issue can the
Cisco Unified CM cluster experience?

A. Unified CM sends an NTPv4 packet.
B. Database replication is not synchronized on the Unified CM nodes.
C. The cluster loses access to port 124 at the firewall.
D. The date/time group on all phones defaults to the time zone of the engineer.

Discover Answer

B

Question#112

When a new SIP phone is registered to Cisco Unified Communications Manager, it keeps failing and showing an `unprovisioned` error message in the phone display. Which problem is a possible cause of this issue?

A. Auto-registration is disabled on the Cisco Unified Communications Manager nodes and the phone device does not have a DN configured.
B. The DN assigned to the phone is already in use by another SIP phone.
C. The phone cannot download and install the latest firmware.
D. The DHCP settings are set incorrectly and the phone does not have an alternate TFTP defined.
E. The DN configuration for this phone is shared with an SCCP phone, which is not supported.

Discover Answer

C

Question#113

Which DHCP option must be set up for new phones to obtain the TFTP server IP address?

A. option 15
B. option 6
C. option 66
D. option 120

Discover Answer

C
Reference:
https://blog.router-switch.com/2013/03/dhcp-option-150-dhcp-option-66/

Question#114

Which two conditions must a user meet to provision a new device using the Self-Provisioning feature? (Choose two.)

A. The user must have a primary extension.
B. At least two DNs must be assigned to the user device.
C. The user must be part of ג€Standard CCM Super Userג€.
D. The user must have the appropriate universal device template linked to the user profile.
E. The user must have at least one user device profile assigned.

Discover Answer

AD

Question#115

How many DNS SRV entries can be defined in the SIP trunk destination address field in Cisco Unified Communications Manager?

A. 1
B. 8
C. 16
D. 4

Discover Answer

C
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/11_5_1/sysConfig/CUCM_BK_SE5DAF88_00_cucm-system-configuration-guide-
1151/CUCM_BK_SE5DAF88_00_cucm-system-configuration-guide-1151_chapter_01110.html

Question#116

On which Cisco Unified Communications Manager nodes can the TFTP service be enabled?

A. any node
B. any two nodes
C. only nodes that have Cisco Unified CM service enabled
D. any subscriber nodes

Discover Answer

C
You can configure the TFTP service on the first node or a subsequent node, but usually you should configure it on the first node. For small systems, the TFTP server can coexist with a Cisco Unified Communications Manager on the same server.

Question#117

Which issue causes slips on a PRI?

A. incorrect clock source
B. incorrect encapsulation
C. incorrectly configured time zone
D. change in the line code

Discover Answer

A

Question#118

An administrator recently upgraded a Cisco Webex DX80 through its web interface but discovered the next morning that the unit has received to its previous version. What must the administrator do to prevent this from happening again?

A. Assign a phone security profile with secure SIP.
B. Set the prepare cluster for rollback to pre-8.0 enterprise parameter to true.
C. Confirm the phone load name in the phone configuration.
D. Assign a universal device template to the phone.

Discover Answer

C

Question#119

An engineer is notified that the Cisco TelePresence MX800 that is registered in Cisco Unified Communications Manager shows an empty panel, and the Touch 10 shows a corresponding icon with no action when pressed. Where does the engineer go to remove the inactive custom panel?

A. The Software Upgrades page in CUCM OS Administration
B. The In-Room Control Editor on the webpage of the MX800
C. The phone configuration page in CUCM Administration
D. The SIP Trunk Security Profile page in CUCM Administration

Discover Answer

A

Question#120

A presence redundancy group is deployed, and an engineer initiates a manual fallback. Which statement about Cisco Server Recovery Manager is true?

A. disconnects all users that had been failed over, and the users must log in again
B. disconnects all users that had been failed over
C. restarts critical services on the secondary node
D. restarts the Cisco Presence Engine

Discover Answer

B