Exams > Amazon > AWS Certified Data Analytics - Specialty: AWS Certified Data Analytics - Specialty (DAS-C01)
AWS Certified Data Analytics - Specialty: AWS Certified Data Analytics - Specialty (DAS-C01)
Page 2 out of 17 pages Questions 11-20 out of 164 questions
Question#11

An Amazon Redshift database contains sensitive user data. Logging is necessary to meet compliance requirements. The logs must contain database authentication attempts, connections, and disconnections. The logs must also contain each query run against the database and record which database user ran each query.
Which steps will create the required logs?

  • A. Enable Amazon Redshift Enhanced VPC Routing. Enable VPC Flow Logs to monitor traffic.
  • B. Allow access to the Amazon Redshift database using AWS IAM only. Log access using AWS CloudTrail.
  • C. Enable audit logging for Amazon Redshift using the AWS Management Console or the AWS CLI.
  • D. Enable and download audit reports from AWS Artifact.
Discover Answer Hide Answer

C
Reference:
https://docs.aws.amazon.com/redshift/latest/mgmt/db-auditing.html

Question#12

A company that monitors weather conditions from remote construction sites is setting up a solution to collect temperature data from the following two weather stations.
✑ Station A, which has 10 sensors
✑ Station B, which has five sensors
These weather stations were placed by onsite subject-matter experts.
Each sensor has a unique ID. The data collected from each sensor will be collected using Amazon Kinesis Data Streams.
Based on the total incoming and outgoing data throughput, a single Amazon Kinesis data stream with two shards is created. Two partition keys are created based on the station names. During testing, there is a bottleneck on data coming from Station A, but not from Station B. Upon review, it is confirmed that the total stream throughput is still less than the allocated Kinesis Data Streams throughput.
How can this bottleneck be resolved without increasing the overall cost and complexity of the solution, while retaining the data collection quality requirements?

  • A. Increase the number of shards in Kinesis Data Streams to increase the level of parallelism.
  • B. Create a separate Kinesis data stream for Station A with two shards, and stream Station A sensor data to the new stream.
  • C. Modify the partition key to use the sensor ID instead of the station name.
  • D. Reduce the number of sensors in Station A from 10 to 5 sensors.
Discover Answer Hide Answer

A

Question#13

Once a month, a company receives a 100 MB .csv file compressed with gzip. The file contains 50,000 property listing records and is stored in Amazon S3 Glacier.
The company needs its data analyst to query a subset of the data for a specific vendor.
What is the most cost-effective solution?

  • A. Load the data into Amazon S3 and query it with Amazon S3 Select.
  • B. Query the data from Amazon S3 Glacier directly with Amazon Glacier Select.
  • C. Load the data to Amazon S3 and query it with Amazon Athena.
  • D. Load the data to Amazon S3 and query it with Amazon Redshift Spectrum.
Discover Answer Hide Answer

C
Reference:
https://aws.amazon.com/athena/faqs/

Question#14

A retail company is building its data warehouse solution using Amazon Redshift. As a part of that effort, the company is loading hundreds of files into the fact table created in its Amazon Redshift cluster. The company wants the solution to achieve the highest throughput and optimally use cluster resources when loading data into the company's fact table.
How should the company meet these requirements?

  • A. Use multiple COPY commands to load the data into the Amazon Redshift cluster.
  • B. Use S3DistCp to load multiple files into the Hadoop Distributed File System (HDFS) and use an HDFS connector to ingest the data into the Amazon Redshift cluster.
  • C. Use LOAD commands equal to the number of Amazon Redshift cluster nodes and load the data in parallel into each node.
  • D. Use a single COPY command to load the data into the Amazon Redshift cluster.
Discover Answer Hide Answer

B

Question#15

A data analyst is designing a solution to interactively query datasets with SQL using a JDBC connection. Users will join data stored in Amazon S3 in Apache ORC format with data stored in Amazon OpenSearch Service (Amazon Elasticsearch Service) and Amazon Aurora MySQL.
Which solution will provide the MOST up-to-date results?

  • A. Use AWS Glue jobs to ETL data from Amazon ES and Aurora MySQL to Amazon S3. Query the data with Amazon Athena.
  • B. Use Amazon DMS to stream data from Amazon ES and Aurora MySQL to Amazon Redshift. Query the data with Amazon Redshift.
  • C. Query all the datasets in place with Apache Spark SQL running on an AWS Glue developer endpoint.
  • D. Query all the datasets in place with Apache Presto running on Amazon EMR.
Discover Answer Hide Answer

C

Question#16

A company developed a new elections reporting website that uses Amazon Kinesis Data Firehose to deliver full logs from AWS WAF to an Amazon S3 bucket.
The company is now seeking a low-cost option to perform this infrequent data analysis with visualizations of logs in a way that requires minimal development effort.
Which solution meets these requirements?

  • A. Use an AWS Glue crawler to create and update a table in the Glue data catalog from the logs. Use Athena to perform ad-hoc analyses and use Amazon QuickSight to develop data visualizations.
  • B. Create a second Kinesis Data Firehose delivery stream to deliver the log files to Amazon OpenSearch Service (Amazon Elasticsearch Service). Use Amazon ES to perform text-based searches of the logs for ad-hoc analyses and use OpenSearch Dashboards (Kibana) for data visualizations.
  • C. Create an AWS Lambda function to convert the logs into .csv format. Then add the function to the Kinesis Data Firehose transformation configuration. Use Amazon Redshift to perform ad-hoc analyses of the logs using SQL queries and use Amazon QuickSight to develop data visualizations.
  • D. Create an Amazon EMR cluster and use Amazon S3 as the data source. Create an Apache Spark job to perform ad-hoc analyses and use Amazon QuickSight to develop data visualizations.
Discover Answer Hide Answer

D

Question#17

A large company has a central data lake to run analytics across different departments. Each department uses a separate AWS account and stores its data in an
Amazon S3 bucket in that account. Each AWS account uses the AWS Glue Data Catalog as its data catalog. There are different data lake access requirements based on roles. Associate analysts should only have read access to their departmental data. Senior data analysts can have access in multiple departments including theirs, but for a subset of columns only.
Which solution achieves these required access patterns to minimize costs and administrative tasks?

  • A. Consolidate all AWS accounts into one account. Create different S3 buckets for each department and move all the data from every account to the central data lake account. Migrate the individual data catalogs into a central data catalog and apply fine-grained permissions to give to each user the required access to tables and databases in AWS Glue and Amazon S3.
  • B. Keep the account structure and the individual AWS Glue catalogs on each account. Add a central data lake account and use AWS Glue to catalog data from various accounts. Configure cross-account access for AWS Glue crawlers to scan the data in each departmental S3 bucket to identify the schema and populate the catalog. Add the senior data analysts into the central account and apply highly detailed access controls in the Data Catalog and Amazon S3.
  • C. Set up an individual AWS account for the central data lake. Use AWS Lake Formation to catalog the cross-account locations. On each individual S3 bucket, modify the bucket policy to grant S3 permissions to the Lake Formation service-linked role. Use Lake Formation permissions to add fine-grained access controls to allow senior analysts to view specific tables and columns.
  • D. Set up an individual AWS account for the central data lake and configure a central S3 bucket. Use an AWS Lake Formation blueprint to move the data from the various buckets into the central S3 bucket. On each individual bucket, modify the bucket policy to grant S3 permissions to the Lake Formation service-linked role. Use Lake Formation permissions to add fine-grained access controls for both associate and senior analysts to view specific tables and columns.
Discover Answer Hide Answer

B

Question#18

A company wants to improve user satisfaction for its smart home system by adding more features to its recommendation engine. Each sensor asynchronously pushes its nested JSON data into Amazon Kinesis Data Streams using the Kinesis Producer Library (KPL) in Java. Statistics from a set of failed sensors showed that, when a sensor is malfunctioning, its recorded data is not always sent to the cloud.
The company needs a solution that offers near-real-time analytics on the data from the most updated sensors.
Which solution enables the company to meet these requirements?

  • A. Set the RecordMaxBufferedTime property of the KPL to "גˆ’1" to disable the buffering on the sensor side. Use Kinesis Data Analytics to enrich the data based on a company-developed anomaly detection SQL script. Push the enriched data to a fleet of Kinesis data streams and enable the data transformation feature to flatten the JSON file. Instantiate a dense storage Amazon Redshift cluster and use it as the destination for the Kinesis Data Firehose delivery stream.
  • B. Update the sensors code to use the PutRecord/PutRecords call from the Kinesis Data Streams API with the AWS SDK for Java. Use Kinesis Data Analytics to enrich the data based on a company-developed anomaly detection SQL script. Direct the output of KDA application to a Kinesis Data Firehose delivery stream, enable the data transformation feature to flatten the JSON file, and set the Kinesis Data Firehose destination to an Amazon OpenSearch Service (Amazon Elasticsearch Service) cluster.
  • C. Set the RecordMaxBufferedTime property of the KPL to "0" to disable the buffering on the sensor side. Connect for each stream a dedicated Kinesis Data Firehose delivery stream and enable the data transformation feature to flatten the JSON file before sending it to an Amazon S3 bucket. Load the S3 data into an Amazon Redshift cluster.
  • D. Update the sensors code to use the PutRecord/PutRecords call from the Kinesis Data Streams API with the AWS SDK for Java. Use AWS Glue to fetch and process data from the stream using the Kinesis Client Library (KCL). Instantiate an Amazon Elasticsearch Service cluster and use AWS Lambda to directly push data into it.
Discover Answer Hide Answer

A

Question#19

A global company has different sub-organizations, and each sub-organization sells its products and services in various countries. The company's senior leadership wants to quickly identify which sub-organization is the strongest performer in each country. All sales data is stored in Amazon S3 in Parquet format.
Which approach can provide the visuals that senior leadership requested with the least amount of effort?

  • A. Use Amazon QuickSight with Amazon Athena as the data source. Use heat maps as the visual type.
  • B. Use Amazon QuickSight with Amazon S3 as the data source. Use heat maps as the visual type.
  • C. Use Amazon QuickSight with Amazon Athena as the data source. Use pivot tables as the visual type.
  • D. Use Amazon QuickSight with Amazon S3 as the data source. Use pivot tables as the visual type.
Discover Answer Hide Answer

C

Question#20

A company has 1 million scanned documents stored as image files in Amazon S3. The documents contain typewritten application forms with information including the applicant first name, applicant last name, application date, application type, and application text. The company has developed a machine learning algorithm to extract the metadata values from the scanned documents. The company wants to allow internal data analysts to analyze and find applications using the applicant name, application date, or application text. The original images should also be downloadable. Cost control is secondary to query performance.
Which solution organizes the images and metadata to drive insights while meeting the requirements?

  • A. For each image, use object tags to add the metadata. Use Amazon S3 Select to retrieve the files based on the applicant name and application date.
  • B. Index the metadata and the Amazon S3 location of the image file in Amazon OpenSearch Service (Amazon Elasticsearch Service). Allow the data analysts to use OpenSearch Dashboards (Kibana) to submit queries to the Amazon OpenSearch Service (Amazon Elasticsearch Service) cluster.
  • C. Store the metadata and the Amazon S3 location of the image file in an Amazon Redshift table. Allow the data analysts to run ad-hoc queries on the table.
  • D. Store the metadata and the Amazon S3 location of the image files in an Apache Parquet file in Amazon S3, and define a table in the AWS Glue Data Catalog. Allow data analysts to use Amazon Athena to submit custom queries.
Discover Answer Hide Answer

A

chevron rightPrevious Nextchevron right